1400mm Baths

How to Choose a 1400mm Bath

A 1400mm bath can be a practical middle ground for bathrooms where a 1500mm or 1700mm bath takes up too much space but you still want a comfortable bathing area. This size can suit apartments, ensuites, family bathrooms and renovations where floor space needs to be carefully planned.

Before choosing, compare the bath width, internal bathing space, installation style, waste position and surrounding clearance. You can also browse our Bathtub collection for other sizes.

Check Internal Space, Not Just the 1400mm Length

Two 1400mm baths can feel very different inside. Compare the internal base length, width, depth and backrest shape rather than relying only on the external measurement.

A deeper or well-shaped 1400mm bath may provide useful soaking space while preserving more bathroom floor area. If your room has slightly more space, compare our 1500mm Baths before deciding.

Choose the Right Bath Layout

A freestanding bath creates a stronger feature but normally needs suitable access around the exposed sides. A back-to-wall design can reduce the gap behind the bath and use the available space more efficiently.

A corner bath sits against both a rear and side wall, which can work particularly well in tighter layouts. For corner models, check whether you need a left- or right-hand configuration. Compare our Corner Baths if this suits your room.

Measure the Complete Bath Zone

Mark the full 1400mm bath footprint on the floor and check clearance from the vanity, toilet, shower screen and doorway. Remember to consider bath width as well as length, because a wider model may still make the room feel restricted.

Also make sure there is practical access for cleaning, installation and getting in and out of the bath.

Plan Tapware, Waste and Overflow Early

Wall-mounted tapware can suit back-to-wall and corner baths, while fully freestanding layouts may also work with floor-mounted bath mixers. Check the spout reach, waste location and overflow configuration before plumbing is finalised.

Waste arrangements vary by model, so compare suitable Bath Wastes and Plugs where required.

1400mm Bath Support in Melbourne

Melbourne Bathroom Shop can help you compare 1400mm bath dimensions, internal bathing space, freestanding, back-to-wall and corner configurations before ordering. Visit our Blackburn showroom at Shop 1A, 214-218 Whitehorse Road, Blackburn VIC 3130 with your bathroom measurements, floor plan or photos to compare suitable options.

Our team can also assist with product information, availability and eligible pickup or delivery options. Final waste position, tapware rough-in, waterproofing and installation requirements should be confirmed with the relevant trades before installation.